Pool Remodel
Commercial
Pools and Spas
All Types of Remodeling and Installation
Inside and Outside
Resurfacing
&
Remodeling
Small Repairs
General Remodeling
Installation
Repair or Install
Electrical
&
Plumbing
Plumbing Pipes
or Install
Copper
Steel
New Installation
Commercial Warranties Offered
White plaster:
5 years
Mini pebble or Any
Aggregate:
5 years
Fiberglass:
5 years
Fiberglass
Services
Pebble Finishes
Other types of Pebble offering through our supplier Superior Pool Products (SCP).
Waterproofing
Hardscaping, Decks, Planter boxes, Any Areas Around
Swimming Pool or Spa
Pool and Water Features
Automated pool cover installation
Fountain waterfall | Spillover
Outdoor Living
Install Any New Type of Hardscaping
Other Services
Turf
Composite decking and hardscaping
Welding
Resurfacing and Remodeling
Plaster
Pool re-plastering is an essential maintenance task that involves removing the old, deteriorated plaster surface of a swimming pool and applying a new layer of plaster.
Equipment Repair
Pool equipment repair involves diagnosing and fixing issues with the various components that make up a pool’s circulation, heating, and cleaning systems. Common pool equipment includes pumps, filters, heaters, chlorinators, and automated control systems.
See More
Proper maintenance and timely repair of these components are essential to ensure the pool operates efficiently and safely.
Pumps
Repairs often involve replacing worn-out seals, gaskets, or bearings. In some cases, the motor or impeller may need to be replaced. Regular maintenance, such as cleaning the pump basket and checking for debris, can help prevent these issues.
Filters
Cartridge filters may need a thorough cleaning or replacement of the cartridges. DE filters often require cleaning or replacing the DE grids. Regular backwashing and maintenance can help keep filters functioning properly.
Heaters
Pool heaters, whether gas, electric, or solar, are essential for maintaining comfortable water temperatures. Common issues include failure to heat, poor water flow, or ignition problems. Repairs can involve cleaning or replacing components such as the heat exchanger, burners, or sensors. Ensuring proper water flow and regular maintenance can extend the life of the heater.
Chlorinators and Salt Systems
Chlorinators and salt systems help maintain the pool’s chemical balance by generating chlorine. Problems with these systems can include clogged cells, incorrect chlorine production, or electronic malfunctions. Repairs may involve cleaning the cell plates, replacing faulty sensors, or addressing electrical issues. Regular inspection and maintenance, such as descaling salt cells, are crucial for optimal performance.
Automated Control Systems
Automated control systems manage various pool functions, such as lighting, heating, and filtration, often through remote or smartphone apps. Issues with these systems can include software malfunctions, communication errors, or faulty sensors. Repairs typically involve troubleshooting the electronic components, updating software, or replacing defective parts.
General Maintenance and Best Practices
Routine maintenance, including inspecting equipment for wear and tear, ensuring proper chemical balance, and keeping the pool area clean, can prevent many equipment issues. When repairs are needed, it is often advisable to consult a professional, especially for complex systems or when dealing with electrical components. Properly functioning equipment not only ensures a pleasant swimming experience but also extends the life of the pool and its components.
Mini-pebble
Repairs to a mini pebble pool surface, also known as pebble finish or pebble tec, involve addressing issues such as cracks, chips, discoloration, or rough spots that may develop over time.
Crack Repair
Crack repair in pools, whether they are made of concrete, fiberglass, or vinyl, is a crucial maintenance task to prevent water leakage and structural damage. The approach to repairing a crack depends on the type of pool and the severity of the crack.
Fiberglass
Fiberglass pool repair involves addressing various types of damage such as cracks, chips, blisters, or fading that can occur over time.
Coping Replacement
Assessment and Preparation: The first step in coping replacement is assessing the existing coping for damage. This includes identifying cracks, loose pieces, and any other signs of wear. The pool is then drained to a level below the coping, or the water level is lowered if a full drainage isn’t necessary.
Removal of Old Coping: The old coping is carefully removed, which may involve chipping away the mortar or adhesive that holds it in place. Care is taken to avoid damaging the pool deck or pool structure during this process. If the coping is set in mortar, it may need to be chipped away using specialized tools.
See More
- Surface Preparation: After removing the old coping, the underlying surface is cleaned and prepared. This may involve removing old mortar, debris, and ensuring the surface is level and smooth. Any necessary repairs to the pool shell or deck edge are also addressed at this stage.
- Installation of New Coping: The new coping stones or bricks are then laid in place. This involves applying a layer of mortar or adhesive and positioning the coping pieces according to the desired pattern and design. It is crucial to ensure that each piece is level and securely attached. Depending on the material, the coping may be made from natural stone, precast concrete, brick, or other materials.
- Grouting and Sealing: Once the new coping is installed, the joints between the pieces are filled with grout or mortar. The area is then cleaned, and, if necessary, a sealant is applied to protect the coping from water and weather damage. Sealing also helps to prevent staining and enhances the durability of the coping material.
- Final Inspection and Cleanup: After the coping is replaced, a final inspection is conducted to ensure everything is properly installed and secure. The area is cleaned up, and any remaining debris is removed.
Deck Surface Replacement
Replacing a concrete or stone pool deck involves several key steps, from planning and demolition to installation and finishing. The process begins with a thorough assessment of the existing deck’s condition. If the old deck is cracked, uneven, or showing signs of severe wear, replacement might be necessary to ensure safety and aesthetics. The first step in replacement is the demolition of the old surface. This involves breaking up the existing concrete or removing the stone pavers. Heavy equipment, like jackhammers or bobcats, is often used to expedite the process. Proper disposal of the debris is crucial, adhering to local regulations regarding waste removal.
Once the old deck is removed, the area is prepared for the new installation. This preparation includes leveling the ground, installing a compacted gravel base, and setting up a framework to outline the new deck’s dimensions. For concrete decks, a reinforced steel mesh or rebar may be laid to provide additional strength. The concrete is then poured and spread evenly, with careful attention to slope and drainage to prevent water accumulation. For stone decks, the stone pavers are laid in the desired pattern, with careful spacing and alignment. Jointing sand is used to fill the gaps between pavers, securing them in place.
After the installation of the new deck, the surface is allowed to cure. For concrete, this involves keeping the surface moist for several days to ensure proper hardening and prevent cracking. Stone decks may require sealing to protect the stones from weathering and staining. Once cured, the deck can be finished with various treatments, such as staining or stamping for concrete, to enhance its appearance. The final steps include cleaning up the worksite, inspecting the deck for quality assurance, and ensuring all drainage systems are functional. This replacement process not only rejuvenates the appearance of the pool area but also enhances safety and durability, providing a comfortable and attractive space for years to come.
CPR Pools
C-53 Contractor License No. 1098868
14320 Ventura Blvd. #204
Sherman Oaks, CA 9142
Call Us at 818-792-5020
